System Management Services
Config
You can also press F8 here to enter the open firmware OK> prompt.
The System Management Services screen contains the following choices.
74
User's Guide
Multiboot
Utilities
Config: Enables you to view your system setup. Go to
"Config" on page 75.
Multiboot: Enables you to set and view the default
operating system, modify the boot sequence, access the
Open Firmware command prompt, and work with other
options. Go to "Multiboot" on page 76.
Utilities: Enables you to set and remove passwords,
enable the unattended start mode, set and view the
addresses of your system's SCSI controllers, select the
active console, view or clear the firmware error log, and
update your system unit's firmware program. Go to
"Utilities" on page 79.
Exit