Serial Port Snoop Setup Menu - IBM RS/6000 User Manual

1. Surveillance:
2. Surveillance Time Interval:
3. Surveillance Delay:
98. Return to Previous Menu
v Surveillance
Can be set to Enabled or Disabled.
v Surveillance Time Interval
Can be set to any number from 1 to 255 minutes.
v Surveillance Delay
Can be set to any number from 0 to 255 minutes.
Surveillance Time Interval and Surveillance Delay can only be changed after
surveillance is enabled.
Refer to "Service Processor System Monitoring - Surveillance" on page 65 for more
information about surveillance.
v Reset Service Processor
Allows the user to reinitialize the service processor.
v Reprogram Service Processor Flash EPROM
This is an automatic process.

Serial Port Snoop Setup Menu

This menu can be used to set up Serial Port Snooping, in which the user can configure
serial port 1 as a "catch-all" reset device.
From the main Service Processor menu, select option 1, Service Processor setup, then
select option 8 (Serial Port Snoop Setup Menu).
1. System reset string:
2. Snoop Serial Port:
98. Return to Previous Menu
1>
OS Surveillance Setup Menu
Currently Enabled
Currently 5 or Not Applicable
Currently 10 or Not Applicable
SERIAL PORT SNOOP SETUP MENU
Currently Unassigned
Currently Unassigned
Chapter 3. Using the Service Processor
47