Configure Nth Boot Device - IBM RS/6000 User Manual

Display Current Settings: Lists the current order of devices in the boot list. The
following screen shows an example of this display.
Current Boot Device
1. Diskette
2. Ethernet (Integrated)
3. SCSI CD-ROM
4. SCSI 4.5 GB Hard Disk id=6
5. SCSI 4.5 GB Hard Disk id=5
Restore Default Settings: Restores the boot list to the default device of:
1. Primary diskette drive
2. CD-ROM drive
3. Tape drive
4. Hard disk drive
5. Network device.
Attention: To change the custom boot list back to the default values, select the
Default. If you change your startup sequence, you must be extremely careful when
performing write operations (for example, copying, saving, or formatting). You can
accidentally overwrite data or programs if you select the wrong drive.

Configure Nth Boot Device

In the description below, Nth can be 1st, 2nd, 3rd, etc. depending on your choice on
the previous menu.
Options display a screen similar to the following:
id=3 (slot=1)
(slot=1)
(slot=5)
.------.
|X=Exit|
'------'
Chapter 4. System Management Services
97