IBM RS/6000 User Manual page 117

IP Parameters
1. Client IP Address [000.000.000.000]
2. Server IP Address [000.000.000.000]
3. Gateway IP Address [000.000.000.000]
4. Subnet Mask [255.255.255.000]
===>
To change IP Parameters, type the number of the parameters for which you want to
change the value.
Attention:
gateway IP address to [0.0.0.0].
Selecting the Adapter Parameters option allows you to view an adapter's hardware
address, as well as configure network adapters that require setup. A screen similar to
the following displays.
Device Slot
1. ethernet 3
2. token-ring 5
3. ethernet Integrated
(Press enter after making selection)
Selecting an adapter on this screen displays configuration menus for that adapter:
.------.
|X=Exit|
'------'
If the client system and the server are on the same subnet, set the
Hardware Address
0004AC5E08D2
0020357A0530
0004ACE4020B
.------.
|X=Exit|
'------'
===>
Chapter 4. System Management Services
101