Table of Contents
Advertisement
Attention: To change the custom boot list back to the default values, select the
Default. If you change your startup sequence, you must be extremely careful when
performing write operations (for example, copying, saving, or formatting). You can
accidentally overwrite data or programs if you select the wrong drive.
Configure Nth Boot Device
In the description below, Nth can be 1st, 2nd, 3rd, and so on, depending on your
choice on the previous menu.
Options display a screen similar to the following:
Configure Nth Boot Device
--------------------------------------------------------------------------------------------------
Navigator keys:
M = return to main menu
ESC key = return to previous screen
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigator key: _
Type the device number of the device name that you want to select as the Nth boot
device. For example, if you entered this menu by selecting 4 on the previous menu
(configure 2nd Boot Device), then enter the number 3 based on the list shown above.
You are thus selecting the SCSI CD-ROM device to be the 2nd (Nth) device in the boot
sequence.
88
User's Guide
Device
Current
Number
Position
1
1
2
2
3
4
3
5
4
6
-
Device
Name
Diskette
Port E2 - 100/10 Ethernet Adapter (Integrated)
Port E1 - 100/10 Ethernet Adapter Integrated)
IDE CD-ROM
SCSI 36.4 MB Hard Disk id=@0,0 (Integrated)
X = eXit System Management Services
Advertisement
Table of Contents
