Operation; Basic Information; Control And Internal Control Unit - Function; Operation Basic Information - RIKA INTEGRA II Instruction Manual

7. OPERATION

BASIC INFORMATION

The stove must only be started when fully fitted.
Your pellet stove is exclusively for burning pellets
made from wood of a controlled quality. Non-pelletised
solid fuels (straw, maize, chopped matter etc.) are not
permitted. Failure to adhere to these guidelines will
make all guarantee and warranty claims null and void
and could have a negative effect on the safety of your
stove.
When operated correctly your pellet stove cannot
overheat. Improper operation can however shorten the
life expectancy of the electric stove components (fan,
motors and electric control) and is not permitted.
CONTROL AND
CONTROL UNIT - FUNCTION
Your pellet stove is fitted
programmable microprocessor control. The user can
preset the individual stove functions via the internal
control unit (keypad with operating display) fitted at
the top of the right hand stove panel.
The control (main board) and the control board may
only be altered by trained specialist dealers or the
service department. Improper handling of these
parts leads to the guarantee and warranty becoming
null and void.

INTERNAL CONTROL UNIT

All settings and functions can be regulated
via this unit.
INTERNAL
with a modern
Fig 1. Internal operating unit, key layout
DISPLAY PANEL:
Display of operating state in illuminated text
MENU:
Navigation in and to the various sub-menu levels
ENTER:
Navigation in the main menus (SB, ON, TM) and
confirmation of use inputs
MINUS/PLUS:
Decrease and increase of user values
ON/OFF:
Switching unit on and off
For a graphical representation of the menu
navigation of the program levels see Appendix,
page 29.
- 14 -