In accordance with the European Directive (2012/19/EU) Waste Electrical and Electronic Equipment (WEEE) The packaging of your new stove is environmentally neutral to a and other local regulations, RIKA supports the setup of take-back great extent� systems and recycling infrastructures�...
In cases of doubt, or in the case of missing or incorrect translations, the German version is always the sole valid version. In the interest of ensuring damage limitation in good time, the guarantee claim should be sent in writing to the RIKA specialist or contract dealer.
Please return 1 completed protocol for putting into service to blockers, lack of cleaning or maintenance and stove malfunctions� RIKA Innovative Ofentechnik GmbH, Müllerviertel 20, 4563 Thorough instruction can prevent many complaints� Micheldorf, Austria�...
Page 7
The client confirms the reception of correct and clear instructions. Our general terms and conditions shall apply. I consent to the collection, saving and use of my personal data (name, address, e-mail) by RIKA Innovative Ofentechnik GmbH for marketing and information purposes.
Dimensions of PRIMO RAO/PGI 6 kW Technical data for PRIMO RAO/PGI 6 kW Technical data Heating power range [kW] 2,5 - 6 Room heating capacity (depending [m3] 50 - 160 on house insulation) Fuel consumption [kg/h] ≤1,3 Pellet container capacity*...
Dimensions of PRIMO RAO/PGI 8 kWI Technical data for PRIMO RAO/PGI 8 kW Technical data Heating power range [kW] 2,5 - 8 Room heating capacity (depending [m3] 50 - 220 on house insulation) Fuel consumption [kg/h] ≤1,9 Pellet container capacity*...
The hardening of the paint is finished after the first as well as the regulations and rules applicable locally� heating with high power� RIKA stoves should only be installed in rooms with normal humidity (dry areas according to VDE 0100 Part 200)� The furnaces are not Safety distances splash water protected and may not be installed in wet areas�...
Stoves type 1 (BA 1): Prior to set up Suitable for multiple occupancy� (Note the different country Floor bearing capacity regulations�) Ensure that the substructure is capable of bearing the weight of the These may only be operated with the combustion chamber door stove prior to set-up�...
Connect at the air intake either a pipe Ø 125 mm for log wood and We recommend original flue pipes from RIKA for proper connection� combi stoves, or Ø 50 mm or Ø 60 mm for pellet stoves� Fix it with a hose clamp (not included!)�...
9. BRIEF INFORMATION ON FUEL - PELLETS Your pellet stove is only approved for the burning of pellets of tested What are pellets? quality� Please ask your pellet stove dealer for tested fuel and a list of monitored fuel manufacturers� Wood pellets are a standardised fuel�...
10. TECHNOLOGY AND SAFETY FUNCTIONS The highest level of pellet technology and safety is the result of Automatic cleaning cycle decades of research and development� The practical advantages of your pellet appliance are convincing� The speed of the flue gas fan increases every hour for a short period of time in order to blow ash out of the combustion cavity for increased operational safety�...
Room sensor, Radio room sensor priority over all operating modes (MANUAL MODE / COMFORT MODE)� This option allows you to control your stove via the room temperature� For more detailed information, please refer to the RIKA room sensor / radio room sensor instructions�...
12. USER INTERFACE - MENU NAVIGATION Display Note Manipulation of the hardware components may only be carried The display consists of two COMFORT LEDs and eight POWER LEDs: out by trained retailers or customer service employees� Improper handling of these parts will result in loss of warranty and guarantee COMFORT LEDS claims! left LED: Status display...
The cleaning process takes up to 3 minutes� Note Comfort mode can only be selected if a RIKA room sensor is When your stove is carrying out a cleaning, the POWER LEDs will connected�...
14. OPTIONS RIKA room sensor Child-proof lock This option allows you to control your stove via the room temperature� To protect against unintentional start-up, a child-proof lock can be RIKA ROOM set up with a simple key combination� For more detailed information please refer to the SENSOR AND RADIO ROOM SENSOR instructions�...
15. WARNINGS To guarantee safe operation, your stove is equipped with numerous safety features� When a warning occurs, the POWER LEDs will flash and the OPERATION BUTTON will be continuously lit red� Carry out the respective action� Your stove is then ready for operation again� Note In case of recurring warnings, the customer service must be notified immediately! DISPLAY...
Page 34
Check the tightness of the stove (combustion chamber door, PRESSURE SENSOR (DAR) cleaning cover), disturbances in the installation room (extractor The required pressure difference fan in operation, closed windows, ���) or the chimney draught� was not achieved within the If it is not possible to acknowledge the error message, please specified time�...
FIRE RISK! In a cold state, dispose it of in the household waste� Note We recommend at least once a year to have all maintenance carried out by your RIKA dealer� Cleaning painted surfaces (If necessary) Wipe the painted surfaces with a damp cloth, do not scrub� Do not Cleaning of the burn pot use solvent-containing cleaners�...
18. CLEANING Your RIKA dealer will gladly advise you about their service and maintenance offers� Notices for cleaning of the stove are regularly displayed on the user interface depending on pellet consumption� The POWER LEDs will be continuously lit yellow�...
Vacuum the combustion residues off the flue gas collecting duct, Cleaning the convection air openings especially the area to the convection fan� Vacuum clean any dust deposits from the convection air openings at regular intervals� The stove should be cleaned thoroughly prior to the start of the heating season to prevent excess odour�...
Cleaning the pellet container Reset - Cleaning interval Do not refill the completely empty container immediately; remove Note the residues (dust, chippings etc�) from the empty container� The unit A reset can only be carried out if the stove temperature is below must be disconnected from the mains! 80 °C! Checking bearings...
19. PROBLEMS - POSSIBLE SOLUTIONS Problem 1 Problem 3 Fire burns with weak, orange flame� Pellets heap up in fire trough, Flue gas discharge when wood is added and during heating phase� window soots up� Cause(s) Cause(s) Leaking cleaning openings Insufficient combustion air Chimney draught too low Poor chimney draught...