Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for RIKA LIVO AH
Summary of Contents for RIKA LIVO AH
- Page 1 LIVO AH LIVO RAO Operating manual...
-
Page 2: Table Of Contents
TABLE OF CONTENTS 1. PREFACE Explanations to symbols ........................................3 Spare part overview exploded diagram ................................4 Spare part overview article numbers ..................................7 Dimensions of LIVO ..........................................8 Amount of Fuel ............................................8 Technical data for LIVO ........................................8 Packaging ..............................................8 Electrical connection ........................................... -
Page 3: Preface
7. COMFORT OPTIONS Room sensor, Radio room sensor ................................... 16 GSM Control .............................................. 16 Interface for various options ...................................... 16 External room thermostat ......................................16 External connection cable bridge ..................................16 Option firenet ............................................16 8. MAINTENANCE Open the combustion chamber door .................................17 Cleaning the flame temperature sensor ................................17 Empty the ash drawer ........................................17 Cleaning of the burn pot - daily ....................................17... -
Page 4: Spare Part Overview Exploded Diagram
Spare part overview exploded diagram... -
Page 7: Spare Part Overview Article Numbers
Spare part overview article numbers Nr. Art.Nr. Description Nr. Art.Nr. Description Nr. Art.Nr. Description LB00707 Decorative door B18331 Cleaning opening cpl. Z36290 Seal for ignition B18335 Decorative door cpl. Sealing cord black N100141 Hexagonal nut M05 N100476 Ø10mm N112482 Flat sealing B18173 Pressure Pipe Combustion chamber... -
Page 8: Dimensions Of Livo
Dimensions of LIVO Technical data for LIVO Technical data Heating power range [kW] Room heating capacity (depending [m ] on house insulation) Fuel consumption [kg/h] till , Pellet container capacity [l]/[~kg] Electric supply [V]/[Hz] Average electrical input F B - T F - S R - S Fuse... -
Page 9: Dimensions Of Livo Rao
Dimensions of LIVO RAO Technical data for LIVO RAO R O - T 3 Technical data Heating power range [kW] Room heating capacity (depending [m ] on house insulation) Fuel consumption [kg/h] till , Pellet container capacity [l]/[~kg] Electric supply [V]/[Hz] Average electrical input F B - T... -
Page 10: Important Information
The hardening of the paint is finished after the first as well as the regulations and rules applicable locally. heating with high power. RIKA stoves should only be installed in rooms with normal humidity Safety distances (dry areas according to VDE 0100 Part 200). The furnaces are not splash water protected and may not be installed in wet areas. -
Page 11: Prior To Set Up
Stoves type 1 (BA 1): Prior to set up Suitable for multiple occupancy. (Note the different country Floor bearing capacity regulations.) Ensure that the substructure is capable of bearing the weight of the These may only be operated with the combustion chamber door stove prior to set-up. -
Page 12: Brief Information On Fuel Pellets
3. BRIEF INFORMATION ON FUEL PELLETS Your pellet stove is only approved for the burning of pellets of tested What are pellets? quality. Please ask your pellet stove dealer for tested fuel and a list of monitored fuel manufacturers. Wood pellets are a standardised fuel. Every manufacturer must adhere to certain conditions in order to enable flawless, energy- Note efficient heating. -
Page 13: Technology And Safety Functions
4. TECHNOLOGY AND SAFETY FUNCTIONS The technological advances in your new combi stove are the result of Automatic cleaning cycle years of testing and practical experience. The practical advantages of your pellet stove are convincing: The speed of the flue gas fan is increased every hour for a short period to blow ash from the burn pot, increasing the operational safety. -
Page 14: Installing The Stove
Ø50mm (pellet stoves) and fix it with a hose We recommend original flue pipes from RIKA for proper connection. clamp (not included!). At pellet stoves with longer intake pipes than 1m the diameter should be increased to 100mm. (see RIKA Connection to the chimney range). -
Page 15: Assembly Disassembly Side Panels
6. ASSEMBLY DISASSEMBLY SIDE PANELS Now loosen the two hexalobular screws and tilt the front side panel. Note Subsequently, lift the front side panel to remove it. Only work on the unit when the mains plug has been disconnected and the stove has cooled down completely. Note During assembly / dismantling do not allow objects (screws etc.) to fall into the pellet container –... -
Page 16: Comfort Options
7. COMFORT OPTIONS External room thermostat Your stove has an interface on the rear wall to which you can Room sensor, Radio room sensor connect a customary room thermostat. This requires a 2-pole cable of 0.5 – 0.75 mm cross-section that you have to connect instead of This option permits control of your stove via room temperature. -
Page 17: Maintenance
8. MAINTENANCE The frequency with which the stove requires cleaning and the Cleaning of the burn pot - daily maintenance intervals depend on the fuel you use. High moisture content, ash, dust and chips may more than double the maintenance Make sure that the air vents are not blocked with ash or clinker. -
Page 18: Cleaning
9. CLEANING Cleaning the flue gas channels and flue gas collecting duct Your RIKA dealer will gladly advise you about their service and maintenance offers. The flue gas channels are situated under and beside the combustion chamber. Depending on pellet consumption, a message prompting cleaning of Lift the convection fin straight up. -
Page 19: Cleaning The Flue Pipes
Unscrew the two wing screws and remove the cleaning lid. Open the rear side panel. Vacuum the combustion residues off the flue gas collecting duct, especially the area to the convection fan. Note Your stove may suck in false air via incorrectly sealed cleaning covers;... -
Page 20: Problems Possible Solutions
10. PROBLEMS POSSIBLE SOLUTIONS Problem 1 Problem 3 Fire burns with weak, orange flame. Pellets heap up in fire trough, Flue gas discharge when wood is added and during heating phase. window soots up. Cause(s) Cause(s) Leaking cleaning openings Insufficient combustion air Chimney draught too low Poor chimney draught Leaking flue pipe connection... -
Page 21: Instructions For Commissioning Protocol
Note Please return 1 completed protocol for putting into service to Warranty terms RIKA Innovative Ofentechnik GmbH, Müllerviertel 20, 4563 Difference between warranty (statutory) and guarantee (voluntary), Micheldorf, Austria. terms of guarantee, determination of wearing parts, reference to pellet quality to be used and the consequences of poor quality. - Page 22 Please contact your warranty partner for any warranty questions or claims. This is your dealer or installation company. No warranty claims can be accepted without proper putting into operation, proper operation according to the operating instructions and the supplements in this information sheet. Protocol for putting into operation for RIKA pellet and combi stoves Date:____________________ Installation address...
-
Page 23: Guarantee
In case of doubt as well as missing or incorrect translations, the German version is the only valid one. For the purpose of timely damage limitation, the warranty claim on the part of the claimant is to be enforced at the RIKA dealer in writing using the invoice and stating the purchase date, model name, serial number and reason for complaint. - Page 24 RIKA Innovative Ofentechnik GmbH Müllerviertel 20 4563 Micheldorf / AUSTRIA Tel.: +43 (0)7582/686 - 41, Fax: -43 Technical and design changes, as well as typesetting and printing errors reserved E-Mail: verkauf@rika.at www.rika.at © 2017 | RIKA Innovative Ofentechnik GmbH...