RIKA INTEGRA II Instruction Manual page 16

Hide thumbs Also See for INTEGRA II:
Table of Contents

Advertisement

On selecting the "MENU" key the display shows the
following weekday:
"TU" = Tuesday,
Press the "ENTER" key to return to the starting point
of the first heating time for Tuesday.
Proceed to enter the rest of the heating times for the
weekdays (Wednesday "WE", Thursday "TH", Friday
"FR", Saturday "SA", Sunday "SU" as described
above.
After acknowledgement with "ENTER" of the E2
value of Sunday (SU) and selection of "MENU" the
display shows:
"PS" (Power Start) = heating
output during the programmed
heating times (S1-E1, S2-E2).
The number corresponds to the heating output in
percent (0% equals minimum heating output, 100%
equals maximum heating output).
By pressing the "+" or "-" keys you can change the
value of the heating output in 5% steps as required.
The value is confirmed with "ENTER" and the
display shows
"PE" (Power End) = heating
output between the programmed
heating times (E1-S2).
"OFF" indicates that the stove is switched off
between the programmed heating times.
The value "OFF" is achieved by pressing the "-" key
until "OFF" is displayed.
If you want to maintain a specific heating output (low
operation) between the programmed heating times
you can set the required value by pressing the "+" or
"-" keys.
The number equals the heating
output in percent (e.g. see window
5%).
Press the "ENTER" key to save the PE value, the
display
shows:
To
improve
combustion quality,
cleaning of the fire pan is programmed into the
control process
"CL" = Clean
the number indicates the time
interval
window 60 Minutes).
By pressing the "+" or "-" keys you can determine
the desired time interval in 5 minute steps (The
cleaning interval can be extended to 300 minutes,
however we recommend a cleaning cycle of 60
minutes). Confirm with "ENTER" and the display
shows:
VA
This is the current software version
of the control and is used for
1.28
customer service reasons (display
only).
Now use "MENU" to access the internal clock and
the following display appears:
"H" = Hour the number indicates
the hour (value range 0 to 23).
- 16 -
automatic
in
minutes
(e.g.
see

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents