Paper Misfeed; Find The Position Of Paper Misfeeds; When Paper Misfeeds Occur Frequently; When Removing Misfed Paper - Toshiba e-Studio2505 User Manual

Multifunctional digital systems
Hide thumbs Also See for e-Studio2505:
Table of Contents

Advertisement

Paper
Misfeed

Find the position of paper misfeeds

When a paper misfeed occurs in the equipment, the operation stops, the alert lamp blinks on the control panel, and a
message appears on the LCD screen to indicate the positions where the paper is misfed.
Press
and [OK] to select [Help]. Check the message, remove any misfed paper, and then press [START] to resume
copying.
P.87 "User Functions Menu List"
When a paper misfeed occurs in the equipment, the instruction to remove the misfed paper appears on the LCD
screen. Press
and

When paper misfeeds occur frequently

When paper misfeeds occur frequently, they may be due to one of the causes listed below:
Unacceptable paper is used.
P.16 "Paper types not acceptable"
The sizes of paper loaded in the drawer or on the bypass tray are not registered into the equipment properly.
P.24 "Preparation 3 - Registering Paper Size and Type"
More misfed paper is still remaining after the release of a paper misfeed.
The side guides are aligned too tight or too loose to the paper.
The height of the stacked paper is exceeding the indicators in the drawer.

When removing misfed paper

Observe the following precautions when you remove misfed paper:
Do not tear misfed paper.
Remove misfed paper carefully with both hands. Do not pull the paper forcefully, otherwise the paper could tear and cause
a paper misfeed. Make sure there are no torn pieces of paper left in the printer.
Do not touch the fuser unit or the metal part around the unit.
When you remove misfed paper within the fuser unit, do not touch the fuser unit or the metal part around the unit. If you
touch the inside of the equipment, this could cause burns or any injury to your hands.
Do not touch the photoconductive drum.
When you remove the misfed paper within the transfer unit or the fuser unit, be careful not to touch the photoconductive
drum. This could stain the copy images.
to scroll up and down to read the instruction.
6 TROUBLESHOOTING

Paper Misfeed

93

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents