Preparation 1 - Turning Power On; Turning On; Saving Energy When Not In Use - Energy Saving Mode - Toshiba e-Studio2505 User Manual

Preparation 1 -
Turning Power ON

Turning on

Press the power switch to " " (on).
Starts warming up, which takes approx. 20 seconds. When the warm-up has finished, the equipment is ready.
READY
1
100% A4
AUTO EXPOSURE
TEXT/PHOTO
If the access code function is enabled, press the [FUNCTION CLEAR] button after any operation has been finished
to prevent unauthorized use of the equipment.
For the details of the access code setting, ask your service technician.
If you press [START] during the warm-up, copying automatically starts after it has finished. When the job is
reserved, "COPYING" appears on the LCD screen to show you the current status.
This function cannot be accessed while "PLEASE WAIT" is being displayed (approx. 15 seconds).
Turning off
Press the power switch to "

Saving energy when not in use - Energy saving mode -

To reduce power consumption, the equipment automatically enters into the energy saving mode when a specified period
of time has passed since its last use. You can also switch the equipment into this mode manually.
There are two types of the energy saving mode; the low power mode and sleep mode.
Types of energy saving mode
Low power mode: "SAVING ENERGY" appears on the LCD screen.
Sleep mode:
The timers for "AUTO POWER SAVE" and "SLEEP MODE" have been set respectively as the factory default settings.
You can change them in the "USER FUNCTIONS" menu.
P.87 "User Functions Menu List"
" (off).
The LCD screen disappears.
1 PREPARATION

Preparation 1 - Turning Power ON

13