Table of Contents
Advertisement
6.TROUBLESHOOTING
5
Lay down the transfer unit, and then press down the two fuser pressure release levers
(green) until they come to a stop.
Press down the levers fully until they stop.
6
Raise the transport guide.
7
Release the misfed paper within the fuser unit.
Pull the misfed paper up or down as shown below depending on its position.
Be sure not to touch the photoconductive drum when releasing the misfed paper.
Pulling it up
8
Return the transport guide and transfer unit to their original positions, and then close
the side cover.
Pulling it down
6 TROUBLESHOOTING
Paper Misfeed
97
- Quick Links:
- Setting up Scan Options
Hide quick links:
Advertisement
Table of Contents
