Toshiba e-Studio2505 User Manual page 22

1 PREPARATION
3
Align the side guides with the edges of the paper, and then push back the lever.
1 2
2
Up to 50 sheets of plain paper (80 g/m or 20 lb. Bond) can be loaded. Be sure that the height of the stacked
paper does not exceed the indicators of the side guides. If paper other than plain is used, set it one sheet at
a time.
Fan the paper well before loading it on the bypass tray, otherwise multiple feeding could occur. Be careful
not to cut your fingers.
Do not push the paper forcibly into the entrance of the bypass feeder, otherwise it could cause a paper
misfeed.
When you use paper longer than the bypass tray size, pull out the paper holder from the tray, and then open it.
2
1
20 Preparation 2 - Loading Paper