Paper Misfeed - Toshiba e-Studio RD30 User Manual

Notes on Removing Paper
Take note of the following points when removing misfed paper.
Take care not to tear the paper
Use both hands and slowly remove the paper so as not to tear it.
Use of force may tear the paper and the removal may become more difficult. Do not leave torn paper inside the equipment.
Paper misfeed lamp stays on after removing misfed paper
You may not find paper at the position indicated by the paper misfeed location lamp depending on the timing of the paper misfeed. Carry out all the
operations suggested in this document when the paper misfeed location lamp does not go off even after removing the misfed paper.
Try erasing again when paper in the upper drawer is not erased
Note that this may create duplicated scan data if you are scanning.
Paper misfeeds occurring frequently
The following may cause frequent paper misfeeds. Check if you have paper misfeeds often.
• The paper you are using is not supported by this equipment.
See the following for details on "Unsupported Paper".
P.28 "Non-reusable Paper" in this manual
• You did not remove all the paper when a paper misfeed occurred.
68