Bowflex Ultimate 2 Assembly Instructions Manual page 30

29
Cable Installation STEP 4
Tool:
• Hex Key (7/32")
a. Uncoil the Cable from Lower Pulley and remove the
Ball Stop. (See Step 1/Figure A)
b. Remove the Angled Pulley from the Rod Box, wrap
the Cable under the Pulley and feed the Cable
through the hole in the Rod Box. (See Figure A)
c. Replace the Angled Pulley (See Figure B) making
sure the cable is between the Pulley and the small
Metal Post on the Pulley Bracket. (See Top View of
Angled Pulley)
d. Feed the Cable through the lower half of the Floating
Pulley Assembly.
Pulley Bracket
Metal Post
Pulley
Top View of
Angled Pulley
Installing Your Bowflex Ultimate
Cable
™
2 Cables
Rod Box
Lower Pulley
Figure A
Figure B
Angled Pulley
Floating Pulley
Assembly