Bowflex Ultimate 2 Assembly Instructions Manual page 15

STEP 6
Parts:
• Base Assembly
• Rod Box
Tools:
• Hex Key (7/32")
6-1 Leave Base in folded position and tilt forward to
gain access to bottom of Rear Base.
6-2 Place the Rod Box through Rear Base and align
with holes in base frame.
6-3 Install the 4 3/4" screw fi rst to hold the Rod Box in
position then install the four 3/4" screws.
6-4 Install the two #8 x 3/4" screws to secure the rear
base covers. Completely tighten all the hardware.
Hardware (1:1):
4 Button Head Screws (3/8" X 3/4")
STEP 7
Parts:
• Base Assembly
• Rod Pack
Tools:
• Phillips Head Screwdriver
7-1 Leave Base in folded position from step 6.
7-2 Align the Rod Pack with the slot in the Rod Box
with the 50 Lb. rods facing down.
7-3 Install and completely tighten hardware.
Hardware (1:1):
3 Self Tapping Screws (#10 X 1")
Assembling Your Bowflex Ultimate
2 Pan Head Phillips Screws (#8 X 3/4")
1 Button Head Screw (3/8" X 4 3/4")
3 Washers (1/4")
Rod Box
#8 x 3/4" Pan
Head Screw
2 Washers (#8)
Rod Pack
50 Lb. Rods
facing down
™
2
Button Head
Screw 4 3/4"
Washer
5 Washers (3/8")
Align with slot
in Rod Box
14
Button Head
Screw 3/4"
Self Tapping
Screw
Washer