Bowflex Ultimate 2 Assembly Instructions Manual page 21

STEP 17 – Upper Assembly is very heavy!
Use two people for this step!
Parts:
• Upper Lat Assembly (from step 16)
• Base Assembly (from step 11)
Tool:
• Hex Key (7/32")
17-1 Insert Upper Lat Uprights into Lower Lat Uprights.
17-2 Install and completely tighten the hardware.
Hardware (1:1):
8 Button Head Screws (3/8" X 3/4")
STEP 18
Parts:
• Front Face Plate
• Assembled Unit (from step 17)
Tool:
• Hex Key (7/32")
18-1 Remove Button Head Screws from top sides
of Lat Tower Uprights.
18-2 Align holes in Face Plate and Uprights.
18-2 Reinstall two upper screws and remaining
hardware and completely tighten.
Hardware (1:1):
4 Button Head Screws (3/8" X 3/4")
Assembling Your Bowflex Ultimate
4 Washers (3/8")
Upper Lat Assembly
Button Head
Washer
Base Assembly
8 Washers (3/8")
Button Head
Screw
Washer
Face Plate
Lat Tower Uprights
™
2
(Rod Pack Not Shown
Screw
(Rod Pack Not Shown
20
For Clarity)
For Clarity)