Scanning The Next Document (Next Document Setting) - Konica Minolta 240f User Manual

5
4
Select the scan size, and press [Enter].
5
Press [Close].
6
Specify the destination, and press <Start>.
% For details on specifying the destination, refer to page 6-3.
5.2.2

Scanning the next document (Next Document setting)

You can scan a series of separate documents and transmit them as a single document. For example, this
enables you to scan an invoice using the ADF and a map using the document glass, and send them together
with a single transmission.
d
The next document settings can be set separately for the ADF and the document glass.
1
Load the document, and press <Fax>.
2
Press [Advanced].
3
Press [Next Doc.].
4
Select [ON] and press [Enter].
If you select [OFF], the next document setting is disabled.
5
Press [Close].
6
Specify the destination, and press <Start>.
% If you do not set the next document settings, this completes the procedure.
% For details on specifying the destination, refer to page 6-3.
5-6
Scan related settings
Konica Minolta 240f
5.2