Reduction Margin - Konica Minolta 240f User Manual

4
Effective recording area
Printing is not possible on the area approximately 3 mm around the edge of the paper. For this reason, the
received document may be reduced in size or cut off during printing. The area which can be printed is referred
to as the "effective recording area".

Reduction margin

The reduction margin is the value that determines whether to cut off an edge or reduce the document to fit
on one sheet when the received document will not fit in the effective recording area. When a document that
is longer than the loaded paper is received, only the blank margin may be printed on the next page, which
can be prevented by setting the "reduction margin".
When the document length exceeds the effective recording area but is within the reduction margin, the doc-
ument is reduced or cut off to fit onto one sheet, but when the document is longer than the reduction margin,
the page is divided into multiple sheets. For details, refer to page 4-31.
d
Set the reduction margin to a value between 0 and 85 mm, according to the length of the margin for the type
of documents that are received most frequently. For details on setting the reduction margin, refer to
page 8-39.
4-32
Document
100% or reduced
zoom ratio
Basic faxing
Effective recording
area
Konica Minolta 240f
4.2