Scan Related Settings; Transmitting Only Part Of The Document (Scan Size) - Konica Minolta 240f User Manual

5.2

Scan related settings

5.2

Scan related settings

5.2.1

Transmitting only part of the document (Scan Size)

You can transmit an image scanned using a scan size set in advance. This is useful when you want to transmit
a part of the document or want to specify the document size.
d
When you scan using the document glass, only an area from the reference setting position equal to the set
scan size is scanned.
When you scan using the ADF, only an area from the center with a width equal to the set scan size is scanned.
The whole length of the document is scanned.
Reference setting position
Reference setting position
1
Load the document, and press <Fax>.
2
Press [Advanced].
3
Press [Scan Size].
If you loaded the document in the ADF, [Auto] is selected.
Konica Minolta 240f
Document glass
A5v A4 F4
Half-letter v Letter Legal
Reference
setting position
A...A4/A5v/F4
Reference
setting
position
A...Legal/Letter/Half-letter v
ADF
5
5-5