Cal Spas Pneumatic Series Owner's Manual page 96

Multi-Purpose Cleaner
Cal Spas' Multi-Purpose Cleaner is an essential part of maintaining your spas finish. Through normal use, the spa's finish can accumulate
dirt, oil, and calcium causing a rough feel and unsightly scum lines. Cal Spas' Multi-Purpose Cleaner is a low detergent, non-abrasive
cleaner specifically formulated to clean the spa without damaging its acrylic finish. The most effective solution to minimize cleaning time
is prevention. When the following steps are followed, the spas finish will actually start to resist most of the elements that cause calcium
build-up and make scum line cleanup easier:
Prior to Spa Start-up and Refilling:
1. Spray Cal Spas' Multi-Purpose Cleaner directly to the spas finish.
2. Wipe clean with a clean soft cloth.
3. Repeat on heavily calcified areas.
4. Wipe spa thoroughly with a wet sponge, rinsing often in a bucket of clean water.
5. Allow spa to dry completely.
6. Apply a coat of Cal Spas' Fast Sheen to the spa entire finish with a soft cloth or sponge.
7. Allow Fast Sheen to dry until white and powdery.
8. Buff clean with a soft cloth, rotating frequently.
Periodic Maintenance:
1. Spray Cal Spas' Multi-Purpose Cleaner directly to the spas finish.
2. Wipe clean with a clean soft cloth.
3. Wipe spa thoroughly with a wet sponge, rinsing often in a
bucket of clean water.
Use of Cal Spas' Multi-Purpose Cleaner:
Cal Spas' Multi-Purpose Cleaner should not be spayed directly into the spa water. Incorrect product usage may cause water clarity issues.
Fast Sheen:
(Spa finish protecting wax)
Cal Spas Fast Sheen is an essential part of maintaining your spas finish. Through normal use, the spas finish can accumulate dirt, oil, and
calcium causing a rough feel and unsightly scum lines.
Cal Spas Fast Sheen is a non-oil based wax that is specifically formulated to protect the spas finish from the chemicals and minerals asso-
ciated with normal spa use.
The most effective solution to minimize cleaning time, is prevention. When the following steps are followed, the spas finish will actually
start to resist most of the elements that cause calcium build-up and make scum line cleanup easier:
Prior to Spa Start-up and Refilling:
1. Spray Cal Spas' Multi-Purpose Cleaner directly to the
spas finish.
2. Wipe clean with a clean soft cloth.
3. Repeat on heavily calcified areas.
4. Wipe spa thoroughly with a wet sponge, rinsing often in a
bucket of clean water.
5. Allow spa to dry completely.
6. Apply a coat of Cal Spas' Fast Sheen to the spa's entire
finish with a soft cloth or sponge.
7. Allow Fast Sheen to dry until white and powdery.
8. Buff clean with a soft cloth, rotating frequently.
Important:
Cal Spas Fast Sheen should not be used on spas full of water. Only apply to a clean, cool, dry surfaces. Incorrect product usage may
cause water clarity issues.
(Spa finish cleaning)
54