Cal Spas Pneumatic Series Owner's Manual page 165

Owner's Manual
Cal Zone Quest 2000 Ozonator
Your new Cal Zone Quest 2000 Ozonator is a state-of-the-art bacteria killing machine. This unit will assist you
in maintaining clean and clear spa water, while saving you time and money with spa chemicals.
Operation
Your Cal Zone Quest 2000 Ozonator will automatically operate during the filter cycles. When the spa is in
filtration cycle, the Ozone Indicator light on the topside control panel will light up, letting you know that the
control box is sending power to the Cal Zone Quest 2000 Ozonator unit.
The Cal Zone Quest 2000 Ozonator unit also has two forms of operating signals. On the topside control panel
there is a yellow light labeled 'OZONE INDICATOR'. This light indicates that the Ozonator is receiving power
from the control box. The second operating signal is the most important. Located on the front side towards the
bottom, is the ozone-mixing chamber. When operating, the lens will display a purple/black light.
Due to the nature of the ozone light, it is difficult to see the light during the daytime. This lens
NOTE:
should be checked at night or in a shaded area.
Ozone Servicing
Your new Cal Zone Quest 2000 Ozonator has been engineered to be service-friendly. In the event that you need
to replace the ozone cartridge, simply follow the instructions listed on the front of the ozone unit.
Owner's Manual
Figure 6. Cal Zone Quest 2000 Ozonator
Operating Instructions
Page 15