Cal Spas Pneumatic Series Owner's Manual page 17

Owner's Manual General Operating Instructions
GENERAL OPERATING INSTRUCTIONS
Your new Cal Spa is very versatile, you can direct the flow of water and air through various locations
throughout your spa. The following list of features are available on most spas:
Air Venturies
Air Venturies are the smaller knobs located around the top of your spa. Each one will let you add a mixture of
air in with the jet pressure. This is accomplished by simply rotating the air venturi handle to the left (Counter
clockwise) to increase the amount of airflow through the jets. To decrease the amount of airflow through the
jets, simply rotate the handle to the right (Clockwise).
NOTE: The Air Venturi system may not be controlled on spas with the optional Turbo System.
Spas equipped with a Cal Zone Quest 2000 Ozonator and Pure Water System will generally make a small amount
of suction noise. If this noise is bothersome, simply close the air venturi located to the left of the control panel.
However, if you leave this air venturi closed, the Pure Water System will not be able to function properly. Please
see page 16 for operation description.
Air Venturies
Figure 6.
Adjustable Jets
Almost all of the jets in your spa are adjustable. Rotating the face of an adjustable jet to the left (Counter
clockwise) will decrease the amount of water flow through the jet. Rotating the face of an adjustable jet to the
right (Clockwise) will increase the amount of water flow through the jet.
Neck jets will be reversed when adjusting pressure.
NOTE:
Figure 7. Adjustable Jets
Revised 01/01/04 Page 15