Cal Spas Pneumatic Series Owner's Manual page 142

Cal Spas Clear Water Plan
Day Three (Friday)
1. Test spa water using test strips. (Be sure to check the expiration date prior to use.)
2. Check bromine floater for sufficient amount of bromine tablets. (Add one if necessary.)
3. Adjust Total Alkalinity, then pH if needed. (See pH and Alkalinity sections for more information.)
4. Add 1 oz. of Oxidizer Shock. (See Oxidizer Shock section for more information.)
Every Month:
1. Inspect equipment area for leaks, rodents, and insects.
Every 3 to 4 Months:
1. Drain and clean your spa with Multi Purpose Cleaner.
2. Polish the acrylic surface with Fast Sheen.
3. Clean and treat spa cover, pillows and Ultra Spa Cabinets with Cover Protector.
Every 6 Months:
1. Clean and treat redwood spa cabinets and gazebos with Nu-Spa redwood stain renewer & brightener.
Cal Spas Clear Water Plan (Chlorine)
This plan and its chemical dosages are intended for Cal Spas' Chemicals only. Most chemical manufacturers use different chemical
formulas and strengths. Only Cal Spas' chemicals are specially formulated to provide proper chemical balance at lower dosages.
Compare labels and dosages and see for yourself. You will get greater protection and performance with Cal Spas' Chemicals.
Always read and follow all printed instruction on chemical bottles and packages.
Day One (Monday)
1. Test spa water using test strips. (Be sure to check the expiration date prior to use.)
2. Add two tablespoons Granular Chlorine. (Chlorine dissipation will vary with water temperature.)
3. Adjust Total Alkalinity, then pH if needed. (See pH and Alkalinity sections for more information.)
4. Add 2 oz. of Stain and Scale Defense.
5. Pull the dirty filter from the spa and place into Liquid Filter Cleaner solution.
6. Place your extra, cleaned, fully dried filter cartridge in the spa.
7. Vacuum your spa with the Cal Spas Vac.
Day Two (Wednesday)
1. Test spa water using test strips. (Be sure to check the expiration date prior to use.)
2. Adjust Total Alkalinity, then pH if needed. (See pH and Alkalinity sections for more information.)
4. Pull the filter from Liquid Filter Cleaner solution hose it off and allow to dry.
Cal Spas Clear Water Plan (Chlorine cont.)
Day Three (Friday)
1. Test spa water using test strips. (Be sure to check the expiration date prior to use.)
2. Add two tablespoons Granular Chlorine. (Chlorine dissipation will vary with water temperature.)
3. Adjust Total Alkalinity, then pH if needed. (See pH and Alkalinity sections for more information.)
4. Add 1 oz. of Oxidizer Shock (See Oxidizer Shock section for more information.)
Every Month:
1. Inspect equipment area for leaks, rodents, and insects.
Every 3 to 4 Months:
1. Drain and clean your spa with Multi Purpose Cleaner.
2. Polish the acrylic surface with Fast Sheen.
3. Clean and treat spa cover, pillows and Ultra Spa Cabinets with Cover Protector.
Every 6 Months:
1. Clean and treat redwood spa cabinets and gazebos with Nu-Spa redwood stain, renewer & brightener.
)
(Bromine cont.
58