Cal Spas Spa Surrounds Owner's Manual

Cal Spas Spa Surrounds Owner's Manual

Cal designs spa surrounds owner's manual

Advertisement

Quick Links

LTR20091033, Rev. A
12/16/08

Advertisement

Table of Contents
loading

Summary of Contents for Cal Spas Spa Surrounds

  • Page 1 LTR20091033, Rev. A 12/16/08...
  • Page 2 Warranty Information . . . . . . . . . . . . . 18 Copyright 2008-2009 LMS, Inc. All rights reserved. Duplication without written consent is strictly prohibited. Cal Spas™ and Cal Enclosures™ are registered trademarks. Due to continuous improvement programs, all models, operation, and/or specifications are subject to change without prior notice.
  • Page 3: Tools And Materials

    Place the lower step on the lower section of the step. To attach the step, screw in 4 screws (2 on each on the outside of the step). Use the toe-in method on both sides, as shown. 2009 Spa Surrounds LTR20091033, Rev. A 25’ tape measure...
  • Page 4 Package R Step Assembly 2009 Spa Surrounds www.calspas.com LTR20091033, Rev. A...
  • Page 5 Package D, E, and I Step Assembly 2009 Spa Surrounds www.calspas.com LTR20091033, Rev. A...
  • Page 6 Cal Select Step Assembly 2009 Spa Surrounds www.calspas.com LTR20091033, Rev. A...
  • Page 7 Planter Assembly 2009 Spa Surrounds www.calspas.com LTR20091033, Rev. A...
  • Page 8 Attach the bar stool legs to support the brace using the provided 2 ½” screws. There will be a total of 12 screws. Place the bar stool seat on a flat surface. (Make sure the finish side is on the ground.) Attach the leg assembly using four 2 ½” screws. www.calspas.com 2009 Spa Surrounds LTR20091033, Rev. A...
  • Page 9 Bar Assembly and Installation Package B and M 2009 Spa Surrounds LTR20091033, Rev. A www.calspas.com...
  • Page 10 Package C, J, and N 2009 Spa Surrounds www.calspas.com LTR20091033, Rev. A...
  • Page 11 2009 Spa Surrounds www.calspas.com LTR20091033, Rev. A...
  • Page 12 Mount the bar top to the corbels with the 2 1/2” screws. The screws must be mounted from the underside of the bar top. Make sure that the bar top rests just below the lip of the spa. www.calspas.com 2009 Spa Surrounds LTR20091033, Rev. A...
  • Page 13 2009 Spa Surrounds www.calspas.com LTR20091033, Rev. A...
  • Page 14 Package R 2009 Spa Surrounds www.calspas.com LTR20091033, Rev. A...
  • Page 15: Bench Assembly

    Bench Assembly Package P and G 2009 Spa Surrounds LTR20091033, Rev. A www.calspas.com...
  • Page 16 Package R 2009 Spa Surrounds www.calspas.com LTR20091033, Rev. A...
  • Page 17: Panel Assembly

    Panel Assembly Package I 2009 Spa Surrounds LTR20091033, Rev. A www.calspas.com...
  • Page 18 Package J 2009 Spa Surrounds www.calspas.com LTR20091033, Rev. A...
  • Page 19: Maintenance

    If your surround package is Cal Select, wipe off any dirt or grime using a sponge and water. Condition the Cal Select with Cal Spas Vinyl Cleaner and Conditioner. Follow directions on label. 2009 Spa Surrounds LTR20091033, Rev. A...
  • Page 20: Warranty Information

    Warranty Information See your Cal Enclosures surround package dealer for a copy of the applicable warranty, details and any questions you may have regarding the warranty coverage on your surround package. Warranty Limitations The Limited Warranty is void if the surround package has been subject to negligence, alteration, misuse, abuse, repairs by non-LMS authorized representatives, acts of God and any other cases beyond the control of LMS.

Table of Contents