Table of Contents
Advertisement
5.5.3 VLAN
The page includes the following fields:
Object
VLAN Setup
Management VLAN ID
Enable Management
VLAN ID
VLAN ID
between clients and servers.
Configure the IP address of DHCP Relay host.
Figure 5-5-11
Description
Check this box to enable the VLAN function.
Configure a specified VLAN to be the management VLAN.
Check this box to enable the Management VLAN function.
The ID of a VLAN. Only in the same VLAN can a wireless PC and a
wired PC communicate with each other. The value can be between 1
and 4095. If the VLAN function is enabled, when AP forwards
packets, the packets out from the LAN port will be added with an
-63-
User Manual of WNAP-7350
Advertisement
Table of Contents
