Access Control - Planet WNAP-7350 User Manual

 DTIM
 RTS/CTS
 Fragmentation Threshold
 Station Control (SSID I)
 Station Control (SSID II)
 Wireless Isolate
 Thresholds, dbm

5.6.4 Access Control

Choose menu "Advanced-> Wireless Settings-> Access Control" to configure the filtering rules for the clients
who like to associate with Wireless AP.
milliseconds. The default value is 100.
This value determines the interval of the Delivery Traffic Indication
Message (DTIM). You can specify the value between 1-255
Beacon Intervals. The default value is 1, which indicates the DTIM
Interval is the same as Beacon Interval.
The RTS/CTS mechanism is widely used in wireless networks in
order to avoid packet collisions and, thus, achieve high
throughput.
This value is the maximum size determining whether packets will
be fragmented. Setting the Fragmentation Threshold too low may
result in poor network performance since excessive packets. 2346
is the default setting and is recommended.
Fill out the Station Control value of SSID I.
Fill out the Station Control value of SSID II.
Isolate all connected wireless stations so that wireless stations
cannot access each other through WLAN. This function will be
disabled if WDS/Bridge is enabled.
Set the AP to the external LED lights and wireless signal strength
received correspondence, when the AP receives the wireless
signal, according to
corresponding LED will be lit.
-78-
User Manual of WNAP-7350
the wireless signal strength, the