After entering the username and password, the Status page screen appears as
Step 2.
Go to "Easy Setup" to choose an Operation Mode. Please refer to the instructions in the next chapter
for configuring the other Operation Modes.
Step 3.
Please enter the SSID, configure your Encryption Settings, Pre-Shared Key, etc. Then click Done
button to make the configuration take effect immediately.
Figure 4-8 WNAP-7350 Web UI Screenshot
Figure 4-9 Choose Operation Mode
Figure 4-10 Configure Wireless Settings
-22-
User Manual of WNAP-7350
Figure 4-8