Planet WNAP-7350 User Manual page 77

 Network Mode
 Extension Channel
 Distance
 ACK/CTS Timeout
 Network Name (SSID)
 Encryption Settings
 WPA Algorithms
 Key Renewal Interval
(Seconds)
 Pre-Shared Key
Select the operating channel width to WiFi 11na (mixed), HT20 or
HT40MHz.
An extension channel is a secondary channel used to bond with the
primary channel to increase this range to 40MHz. Bonded channels
allow for greater bandwidth on the local network.
To decrease the chances of data retransmission at long distance, the
IEEE 802.11a/n Wireless Outdoor CPE can automatically adjust
proper ACK timeout value by specifying distance of the two nodes.
ACK/CTS Timeout settings are for long distance links. It is important
to tweak settings to achieve the optimal result based on requirement.
The device's default settings should be sufficient for most
applications.
The value is auto determined by distance between the radios, data
rate of average environment.
It is the wireless network name. The SSID can be 32 bytes long.
User can use the default SSID or change it.
The default SSID is WNAP-7350.
Select the encryption type that you would like to use.
Select the WPA Algorithms that you would like to use.
The key renewal time is the period of time that the AP uses the same
key before a new one is generated.
Data encryption and key are required for wireless authentication.
-70-
User Manual of WNAP-7350