Wireless Mode - Wds Access Point - Planet WNAP-7350 User Manual

5.6.1.2.
Wireless Mode – WDS Access Point
The page includes the following fields:
Object
 Wireless Mode
 Country Code
 Frequency (Channel)
 Site Survey
Figure 5-6-2
Description
Click to select Wireless Mode from pull down menu.
There are 4 options available:
Access Point:
This mode allows wireless clients or Stations(STA) to access
WDS Access Point:
This mode enables the wireless interconnection of Access Point in an
IEEE802.11 network .and accept wireless clients at the same time.
WDS Repeater:
Set to this mode to enable the wireless access point repeat the signal
of root access point using WDS.
WDS Client:
Set to this mode to enable wireless client using WDS to connect to
the WDS Access Point.
Set your country code by clicking the "Set Country Code".
Set the channel you would like to use. The channel range will be
changed by selecting different domain.
Click "Site Survey" button to observe the signal of remote sites.
-69-
User Manual of WNAP-7350