Installing The Ap - Planet WNAP-7350 User Manual

3.3 Installing the AP

Please install the AP according to the following steps. Don't forget to pull out the power plug and keep your
hands dry.
Step 1. Plug the N-Type (M) to N-Type (M) RF cables into the antenna connectors of the WNAP-7350, and
then connect the N-Type (F) antennas to the other side of the RF cables.
Step 2. Plug the RJ-45 Ethernet cable into the LAN Port of WNAP-7350 through the waterproof kit.
Step 3. Take out the power cord and PoE injector, plug the power cord into the DC port and plug the other side
of the RJ-45 cable into the POE port of the PoE injector.
Figure 3-1
Figure 3-2
Figure 3-3
-14-
User Manual of WNAP-7350