Table of Contents
Advertisement
1. Connect the LAN port of WNAP-7350 to the POE port of the PoE Injector over an Ethernet cable.
2. Connect the PC to the LAN port of the PoE Injector over an Ethernet cable.
3. Plug one end of the power cord into the PoE Injector, and the other end in electrical socket.
4. Go to "Advanced-> Operation Mode" to configure it to Client Router mode.
WISP Setup Procedure:
Step 1. Go to Advanced-> Wireless Settings-> Profile Settings.
Step 2. Click "Site Survey" to discover the Wireless Internet Service Provider.
Step 3. Select the WISP's AP, and the click "Select".
Figure 5-3-20
Figure 5-3-21
-39-
User Manual of WNAP-7350
Advertisement
Table of Contents
