Table of Contents
Advertisement
5)
The following TCP/IP Properties window will display and the IP Address tab is open on this window
by default.
Now you can configure the TCP/IP protocol below:
Setting IP address manually
1
Select Use the following IP address radio button.
2
If the AP's LAN IP address is 192.168.1.1, type in IP address 192.168.1.x (x is from 2 to 254), and Subnet
mask 255.255.255.0.
3
Select Use the following DNS server addresses radio button. In the Preferred DNS Server field you can
type the DNS server IP address which has been provided by your ISP
Now click OK to keep your settings.
Figure B-4
-90-
User Manual of WNAP-7350
Advertisement
Table of Contents
