Dmz; Firewall - Planet WNAP-7350 User Manual

 Protocol
 Comment

5.4.3 DMZ

The page includes the following fields:
Object
 DMZ Settings
 DMZ IP Address

5.4.4 Firewall

The protocol used for this application, either TCP, UDP, or
TCP&UDP (all protocols are supported by the Device.).
Make a comment to help identify the setting.
Figure 5-4-3
Description
Select Enable to enable the DMZ function.
To support DMZ in your firewall design, fill in the IP address of
DMZ host that can be accessed from the WAN interface.
-48-
User Manual of WNAP-7350