User Manual of WNAP-7350
Step 4b. Wall Mounting:
(b.1) Attach the mounting bracket to the back of the device by using four screws and flat washers.
(b.2) Assemble the M bracket on the wall by using four screws and flat washers.
(b.3) Install the mounting bracket assembly inside the M bracket mounted in the wall by using four screws and
flat washers.
Figure 3-6
Step 5. Connect the power cord to the power socket on the PoE injector, and the other end into an electrical
outlet. Then power on the AP.
-16-