Chapter 3. Connecting To The Ap; System Requirements; Installing The Ap - Planet WDAP-C1750 User Manual

3.1 System Requirements

Broadband Internet Access Service (Cable/xDSL/Ethernet connection)

One IEEE 802.3at PoE switch (supply power to the WDAP-C1750)

PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors

PCs running Windows 98/ME, NT4.0, 2000/XP, Windows Vista/Win 7, MAC OS 9 or later, Linux, UNIX

or other platforms are compatible with TCP/IP protocols
1. The AP in the following instructions refers to PLANET WDAP-C1750.
2. It is recommended to use Internet Explore 7.0 or above to access the AP.

3.2 Installing the AP

Before installing the AP, make sure your PoE switch is connected to the Internet through the broadband service
successfully at this moment. If there is any problem, please contact your local ISP. After that, please install the
AP according to the following steps. Don't forget to pull out the power plug and keep your hands dry.
Step 1.
For Wooden Ceilings
1. Place the mounting bracket to a ceiling in your desired location and use the four self-tapping screws
included in the ceiling mounting kit to fix it into place.
2. Attach the AP to the mounting bracket by aligning the grooves in the AP to the ceiling mount.
3. Secure the AP firmly in place using the thumb screw.

Chapter 3. Connecting to the AP

-14-
User Manual of WDAP-C1750