Remote Start Valet Mode; Remote Start Safety Features - Code Alarm Procomp Owner's Manual

Professional series deluxe vehicle security and remote start system with 900 mhz 2 way confirming oled remote control

Hide thumbs Also See for Procomp:

Table of Contents

Remote Start Valet Mode

Remote Start Valet Mode is used to disable the system from remote starting. To enter

or exit remote start valet mode simply follow the 4 steps outlined below:

1. Push and hold the programming/valet button.

2. Cycle the ignition ON/OFF, ON/OFF, ON/OFF.

3. Release the programming/valet button.

4. The LED will flash 2 short flashes and 1 long flash when in remote start

valet mode

For safety and security reasons, the system will shutdown or prevent the remote

vehicle starter from activating if any of the following occur:

1. The vehicle hood is open.

2. The brake pedal is pressed prior to turning the ignition key to the ON

position.

3. The engine is over-revved (tach checking only).

4. Remote Start Valet Mode is active.

Table of Contents

Professional procomp