Activating Aux 1 (Optional); Using The Progressive Car Finder Feature; Using The Personal Protection Alarm; Valet Mode - Code Alarm PROFESSIONAL Series Owner's Manual

Activating the AUX 1 Output (Optional)
If this feature is enabled on your system, pressing the
simultaneously will activate an optional feature. This feature can be programmed for a
wide range of functions like power window or sunroof automation, please consult your
installing dealer to determine the functionality of your system.

Using the Progressive Car Finder Feature

Press the
and sound 5 times at low volume, increasing in volume each time the button is
pressed.
Using the Personal Protection Alarm (Panic)
Press and hold the
During panic mode, the normal function of the transmitter buttons will be suspended.
The transmitter's
option is installed). To stop the alarm, press and hold the
again for 3 seconds. The system will automatically stop after 30 seconds.

Valet Mode

When valet mode is activated the status LED will light solid, and all security functions
will be disabled. To enter or exit valet mode simply follow the steps outlined below:
1. Turn the vehicle's ignition ON.
2. Push and hold the programming/valet button.
3. The LED will turn on solid when valet mode is active
4. Release the programming/valet button.

User Selectable Notification Chirps

System ARM / DISARM chirps can be toggled ON or OFF without entering the
programming feature banks.
1. Turn the ignition ON then OFF.
2. Press and release the valet/programming button 3 times. The system
will respond with 1 chirp for ON or 2 chirps for OFF.
4
button to locate your vehicle. The system will flash the parking lights
button for 3 seconds to activate the personal protection alarm.
and buttons can be used to lock and unlock the door (if the
and buttons
button on the transmitter