Manual Transmission Mode; Fuel Saver Mode; Temp Start - Code Alarm Procomp Owner's Manual

Professional series deluxe vehicle security and remote start system with 900 mhz 2 way confirming oled remote control
Hide thumbs Also See for Procomp:
Table of Contents

Advertisement

Manual Transmission Mode

Remote starting a vehicle equipped with a manual transmission will require a 2
step safety sequence, Enter Ready Mode and Activate Ready Mode. The steps for
entering and activating ready mode are programmable, see your installing dealer
for details.
1 - Manual Transmission - Enter Ready Mode: Manual transmission enter
ready mode is step 1 of 2 required to allow remote start activation. Perform 1 of
the following steps to Enter Ready Mode.
Parking Brake + Start Button - Parking brake on then activate the
remote start via the transmitter. (default)
Parking Brake Twice - Parking brake on, off, on.
Parking Brake + Brake - Parking brake on then press the brake pedal.
2 - Manual Transmission - Activate Ready Mode: Manual transmission
activate ready mode is step 2 of 2 required to allow remote start activation.
Perform 1 of the following steps to Activate Ready Mode, once complete the
remote start will shutdown and the transmitter can then be used to remote start
the vehicle.
Last Door Closed + Lock - Ready after last door is closed then lock
is pressed on the transmitter. (default)
Last Door Closed - Ready after last door is closed.

Fuel Saver Mode

By default the remote start will run for a set period of time, to give the system added
flexibility you can adjust this time from the remote control. The selectable run times
are 5, 10, 15, 20, 45, and 60 minutes. To adjust the run time refer to the activating
remote control features sections of this manual.

Temp Start

Start allows automatic remote start activation once the ambient temperature
Temp
of the vehicle drops to the preset threshold of 0 degrees Fahrenheit. It is required
that the feature be set to ON in the remote start installation feature bank and will
only operate when activated from the remote control. To activate the feature from
the remote control
manual.
NOTE: The security system must be armed for this feature to operate.
2012 Audiovox Electronics Corporation. All rights reserved.
refer to the activating remote control features sections of this
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Professional procomp

Table of Contents