Additional 2 Way Oled Remote Control Features - Code Alarm Procomp Owner's Manual

Additional 2 Way OLED Remote Control Feature
Descriptions
The following features / menus are activated through the 2 way remote control's
additional advanced level menus, refer to the activating 2 way remote control
features section of this manual.
AUX Menu
Controls the 4 optional auxiliary outputs
Battery Save Mode
While in Battery Save Mode the 2 way remote control will NOT look for any
incoming signals from the main unit until battery save mode is turned off. In addition
to the menu screen, you can manually turn battery save on/off as follows:
Battery save OFF: Press and hold
Battery save ON: Press and hold
Melody / Vibration Mode
The remote control can play a melody tone, vibrate or both each time it receives a
response from the vehicle.
Status Check
The remote control will update the vehicle's current status.
Temp Check
The remote control will display the vehicle's interior temperature.
Parking Meter Timer
The remote control will countdown time based on the amount of time set by the
user.
Alarm Clock
Alarm clock with selectable alarm tones.
Stop Watch
Displays time counting forward in seconds, minutes and hours.
2012 Audiovox Electronics Corporation. All rights reserved.
for 2 seconds.
+ for 2 seconds.
13