Activating Optional Aux 1 (Optional); Using The Car Finder Feature; Using The Personal Protection Alarm; Valet Mode - Code Alarm ca1153 Owner's Manual

Professional series
Table of Contents

Advertisement

Activating Optional AUX 1 (Optional)

If this feature is enabled on your system, pressing the
simultaneously for 3 seconds will activate an optional feature. This feature can be
programmed for a wide range of functions like power window or sunroof automation,
please consult your installing dealer to determine the functionality of your system.
Using the Progressive Car Finder Feature
Press the
and chirp 5 times at low volume, increasing in volume each time the button is pressed.
Using the Personal Protection Alarm (Panic)
Press and hold the
During panic mode, the normal function of the transmitter buttons will be suspended. The
transmitter's
installed). To stop the alarm, press and hold the
seconds. The system will automatically stop after 30 seconds.

Valet Mode

When valet mode is activated the status LED will light solid, and all security
functions will be disabled. To enter or exit valet mode simply follow the 4 steps
outlined below:
1.
Turn the vehicle's ignition ON.
2.
Push and hold the programming/valet button.
3.
The LED will turn on solid when valet mode is active
4.
Release the programming/valet button.
Eliminating Lock / Unlock Notification Chirps
System lock and unlock notification chirps can be toggled ON or OFF without
entering the programming feature banks.
1.
Turn the ignition ON then OFF.
2.
Press and release the valet/programming button 3 times. The system
will respond with 1 chirp for ON or 2 chirps for OFF.
4
button to locate your vehicle. The system will flash the parking lights
button for 3 seconds to activate the personal protection alarm.
and
buttons can be used to lock and unlock the door (if the option is
and
buttons
button on the transmitter again for 3
ca1153 rev a.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents