Table of Contents
Advertisement
Coded Emergency Override Procedure:
The system has an optional override mode that allows you to program a 2 digit
personal code using the emergency override button offering a higher level of
security. This feature must be enabled by your installing dealer, the default
override code is 11.
1. Enter the vehicle (the security system will trigger).
2. Turn the ignition switch to the ON position.
3. Within 5 seconds press the valet button the number of times
corresponding to the first digit of your personal code (Default digit is
1).
4. Within 5 seconds turn the ignition key OFF, then ON.
5. Within 5 seconds press the valet button the number of times
corresponding to the second digit of your personal code (Default digit
is 1).
6. Within 5 seconds turn the ignition key OFF, then ON.
7. If entered correctly the security system will turn off.
8. Turn the ignition key to the OFF position.
Programming Your Personal Override Code
1. Make sure the security system is disarmed.
2. Turn the ignition key to the ON position.
3. Within 10 seconds press and release the valet button 3 times.
4. Within 10 seconds turn the ignition key OFF then ON 3 times (The
horn will honk and the lights will flash 1 time).
5. Within 10 seconds press and release the valet button the
number of times corresponding with the first digit of your personal
code (1-9).
6. Within 10 seconds turn the ignition key OFF then ON.
7. Within 10 seconds press and release the valet button the number of
times corresponding with the second digit of you personal code (1-9).
8. Within 5 seconds turn the ignition key OFF.
9. You will notice the LED flash a number of times corresponding with the
code you entered.
Note: If 15 seconds of inactivity passes the system will abort programming.
Note: Do not lose your "Personal Override Code". Reprogramming a
new code without the original code can only be performed by an
authorized dealer.
2012 Audiovox Electronics Corporation. All rights reserved.
7
Advertisement
Table of Contents
