Replacing Remote Control Batteries - Code Alarm Procomp Owner's Manual

Professional series deluxe vehicle security and remote start system with 900 mhz 2 way confirming oled remote control

Hide thumbs Also See for Procomp:

Table of Contents

Replacing Remote Control Batteries

CAETX91 1 Way 6 Button Remote Control:

The battery (model CR2032) inside each remote control should last approximately 1

year under normal use. When the battery becomes weak you will notice the remote

control range (the distance from the vehicle the remote control will work) deteriorate

and the small LED on the remote control will dim. To replace the remote control

batteries:

1. Remove 2 side panels and 1 screw then disassemble the halves of the remote

control.

2. Remove the old battery, observing the +/- symbols on the batteries and

replace with new CR2032 battery.

3. Reassemble the halves of the remote control and install the 2 side panels and 1

screw.

4. Test operation of the remote control.

Replacement remote control part number:

CATXCOMP 2 Way OLED Remote Control:

The battery inside the 2 way OLED remote control is rechargeable, use the supplied

battery charger to charge the battery until the battery icon on the OLED screen

shows charging is complete. It is recommended that the battery be fully charged

before normal use.

Replacement remote control part number:

CAETX91

CATXCOMP

Table of Contents

Professional procomp