Download Print this page

Bgd36Cf Finishing; Optional Blower Installation; Optional Fan Installation - Napoleon BGD36CFNTR Installation And Operating Instructions Manual

Napoleon gas fireplaces - installation and operating instructions

Advertisement

PG 4-6
INTRODUCTION
Warranty
General Instructions
General Information
Care of Glass & Plated Parts
Unit Dimensions
6-22
VENTING
Venting Lengths
Air Terminal Locations
Typical Vent Installations
Special Vent Installations
Venting Application Flow Chart
Venting Specifications
BGD6CF Pre-Installation Preparation
23-30
INSTALLATION
Wall and Ceiling Protection
Using Flexible Vent Components
Using Rigid Vent Components
Restricting Vertical Vents
Gas Installation
Mobile Home Installation
Installing Standoffs
Framing
Mantle Clearances and Enclosures
31
COMMON FINISHING
Glowng Embers
Charcoal Embers
Vermiculite
Logo Placement
PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE
• Do not burn wood or other materials in this fireplace.
• The product is a vented gas fireplace
• Adults and especially children should be alerted to the hazards of high surface temperatures and should stay away to
avoid burns or clothing ignition. Keep young children and animals away when the fireplace is hot.
• Due to high temperatures, the fireplace should be located out of traffic and away from furniture and draperies.
• Clothing or other flammable material should not be placed on or near the fireplace.
• Any safety screen or guard removed for servicing must be replaced prior to operating the fireplace.
• It is imperative that the control compartments, burners and circulating blower and its passageway in the fireplace
and venting system are kept clean. The fireplace and its venting system should be inspected before use and at least
annually by a qualified service person. More frequent cleaning may be required due to excessive lint from carpeting,
bedding material, etc. The fireplace area must be kept clear and free from combustible materials, gasoline and other
flammable vapours and liquids.
• Under no circumstances should this fireplace be modified.
• This fireplace must not be connected to a chimney flue pipe serving a separate solid fuel burning appliance.
• Do not use this fireplace if any part has been under water. Immediately call a qualified service technician to inspect the
fireplace and to replace any part of the control system and any gas control which has been under water.
• Do not operate the fireplace with the glass door removed, cracked or broken. Replacement of the glass should be done
by a licensed or qualified service person.
• Do not strike or slam shut the fireplace glass door.
• This fireplace uses and requires a fast acting thermocouple. Replace only with a fast acting thermocouple supplied by
Wolf Steel Ltd.
NOte: CHAnGES, OTHER THAn EDITORIAL, ARE DEnOTED By A VERTICAL LInE In THE MARGIn.
TAbLE OF CONTENTS
31-32
32-33
33-34
35
36-37
37
(BGD42CF ONLY)
38-40
41-42
43
44
WARNING

bGD36CF FINISHING

Log Placement
Door Operation
bGD42CF FINISHING
Log Placement
Grate Installation
Door Installation / Removal

OPTIONAL bLOWER INSTALLATION

BGD6CF Accessing the Blower
BGD4CF Accessing the Blower
Installing the Blower

OPTIONAL FAN INSTALLATION

GD36 THERMOSTATIC SENSOR
CONTROL
OPERATION / MAINTENANCE
Operating Instructions
Maintenance
ADJUSTMENTS
Pilot Burner Adjustment
Venturi Adjustment
COMMON REPLACEMENTS
bGD36CF REPLACEMENTS
bGD42CF REPLACEMENTS
TROUbLE SHOOTING GUIDE
SERVICE HISTORY
NOTES

W45-0566 / A / 07..06

Advertisement

loading

This manual is also suitable for:

Bgd42cfnBgd36cfptrBgd42cfp