Table of Contents
Advertisement
•
Press OK to store the current name or edit/add a name, then
press OK.
•
Confirm the phone number or edit as is necessary. If an Access Code
Prefix (hunt group number) has been configured for the phone, do
not add a hunt group prefix. Calls placed from the Phone Book will
automatically have the configured Access Code Prefix inserted. Press
OK to continue.
•
Optionally, select a ring tone that will be used when the Call ID is matched for inbound calls. Set to
Defaults will use the default ring cadence and tone. Press Select to continue.
•
Assign an available 2-digit speed dial number (00–79), then press OK. This number can be used to quick
dial. For example, if stored as 02, simply dial 02 then lift the receiver to place the speed dial call.
SET TO DEFAULTS
If required, the phone configuration can be returned to the original factory default settings.
To default the configuration:
•
Press the
button, then select 6. Default.
•
Press the Yes softkey to set the phone to factory defaults, or press
No to cancel.
Defaulting the phone requires a reboot. When you leave the menu (press the Back softkey), you will receive a reboot
notice. Press the Yes softkey to reboot the phone now. The configuration will not use default values until the phone
is rebooted. If looking to re-register the phone that has been preconfigured as an extension to a FortiVoice system
on the same LAN, reboot the phone again by pressing the
softkey to reboot the phone.
Returning the phone to factory defaults deletes any previously customized settings.
LOCK/UNLOCK CONFIG
If required, some of the critical configuration parameters can be locked to prevent accidental changes.
These include Network settings, SIP setting and Flexible key assignments.
To lock portions of the configuration:
•
Press the
button, then select 7. Lock/Unlock Config.
•
Enter a password then press OK.
•
Confirm the password then press OK.
•
Store the password somewhere for future reference.
•
Once assigned, select 7. Lock/Unlock Config to lock the
configuration.
•
To unlock the configuration, press the
•
Enter the password, then press OK.
F O R T I F O N E - 3 5 0 i T E L E P H O N E U S E R G U I D E
button, then select 9. Reboot. Press the Yes
button, then select 7. Lock/Unlock Config.
3 9
Advertisement
Table of Contents
Troubleshooting
