Table of Contents
Advertisement
Message Waiting Tone
When the notification of a new message is received, the Message LED flashes. As an option, a brief "stutter"
dial tone will provide an audible indication for a message waiting when going off hook to place calls.
To enable/disable stutter dial tone for a message wait indication:
•
Press the
button, then select 4. Call Preferences, then 5. Msg Waiting Tone.
•
Press the On softkey to enable stutter dial tone, or press the Off softkey to disable stutter dial tone.
•
Press the Back softkey or the
Auto Answer
For incoming calls, the phone can automatically engage the speakerphone or headset.
To enable/disable Auto Answer:
•
Press the
button, then select 4. Call Preferences, then 6. Auto Answer.
•
Press the On softkey to enable Auto Answer, or press the Off softkey to disable Auto Answer.
•
Press the Back softkey or the
Anonymous Call Block
The FortiFone-350i phone can block incoming calls with an anonymous caller ID.
To enable/disable Anonymous Call Blocking:
•
Press the
button, then select 4. Call Preferences, then 7. Anonymous Call Block.
•
Press the On softkey to enable or press the Off softkey to disable Anonymous Call Blocking.
•
Press the Back softkey or the
Access Code Prefix
The FortiFone-350i phone can automatically prepend digits* to a phone number dialed from the Missed
Calls log, Received Calls log or Phone Book. For example, you should program a Hunt Group (ie. 9) if you
normally dial 9 to reach an outside line. This will ensure that calls placed from the Call Logs or Phone Book
are properly dialed out of the system.
To program an Access Code:
•
Press the
button, then select 4. Call Preferences, then 8. Access Code Prefix.
•
Enter the digits that need to be prepended to all numbers dialed
from the Call Logs or Phone Book.
•
Press the OK softkey when complete.
F O R T I F O N E - 3 5 0 i T E L E P H O N E U S E R G U I D E
button to exit the menu.
button to exit the menu.
button to exit the menu.
3 3
Advertisement
Table of Contents
Troubleshooting
