Secondary Dns Address; Mac Address; Vlan Settings; Vlan Priority (Lan) - Fortinet FortiFone-350i User Manual

Secondary DNS Address

Should the primary not respond, the phone will use the secondary DNS for FQDN resolution. This is an
optional but recommended setting.
To assign the Secondary DNS Address:
• Press the button, then select 1. Network Configuration, then 6. Secondary DNS Address.
• Input the Secondary DNS Address using the dial pad and press the
OK softkey to save changes.

MAC Address

To view the MAC address assigned and used by the phone:
• Press the button, then select 1. Network Configuration, then 7. MAC Address.
• The MAC address of the phone will be visible and should match the
one listed on the label on the bottom of the phone.

VLAN Settings

VLAN settings define the Ethernet frame priority and VLAN identification in accordance with IEEE 802.1p/Q
standards. Separate VLAN tags are assigned for the IP phone PC port and the LAN (voice) port. With a VLAN
ID assigned, only frames with the assigned ID are accepted, and all SIP and voice frames sent by the
FortiFone-350i include the VLAN ID assigned to the LAN port. FortiVoice phone systems do not support VLAN
tagging so this should not be used with FortiVoice phone system deployments.
For proper operation, other network elements (LAN switches and default gateway) must support and be configured
with proper VLAN parameters.
VLAN settings are overwritten if CDP is enabled.
Changing the VLAN parameters requires a reboot of the IP phone. When you exit the menu, you will receive a reboot
notice. The phone must be rebooted to use the new values.

VLAN Priority (LAN)

The VLAN Priority (LAN) establishes the priority for Ethernet frames from the LAN port including signaling
and voice packets. Setting the VLAN ID to zero (0) disables VLAN framing and the IP phone uses only
standard Ethernet frames.
To assign VLAN Priority for the LAN (voice) port:
• Press the button, then select 1. Network Configuration, then 8. VLAN Settings.
• Select 1. VLAN Priority (LAN).
• Input the VLAN Priority for the LAN port using the dial pad and
press the OK softkey to save your entry.
F O R T I F O N E - 3 5 0 i T E L E P H O N E U S E R G U I D E 1 7