Table of Contents
Advertisement
•
Enter the hunt group you normally use to place outgoing calls (example: 9), then press the OK softkey.
CONFIGURATION OVERVIEW
The FortiFone-350i supports the access and configuration of many parameters directly from the Telephone
User Interface. To access the Configuration menu, press the
The configuration menu consists of several sub menus as listed below:
1. Network Configuration
2. SIP Configuration
3. Phone Settings
4. Call Preferences
5. Directory
6. Set to Defaults
7. Lock/Unlock Config
8. Information
9. Reboot Phone
NETWORK CONFIGURATION
The Network Configuration menu allows the access and configuration of the network parameters for
the phone.
After any network configuration changes, you will receive a reboot notice. Changing network parameters requires a
reboot of the phone before the new values can be used. Networking parameters can only be changed when the
mode is set to Static.
Network Mode
The phone is capable of obtaining all of its IP configuration data from a DHCP server. When a DHCP server
is not available, static address parameters can be used. Selecting Static requires the manual entry of other
several network parameters including:
•
IP address of the phone
•
Default gateway IP address
•
Subnet mask
•
DNS address
To set the Network Mode:
•
Press the
button, then select 1. Network Configuration, then 1. Network Mode.
•
Scroll the Network Mode options using the Down softkey and press
Select to select a Mode.
F O R T I F O N E - 3 5 0 i T E L E P H O N E U S E R G U I D E
button while the phone is not in use.
1 5
Advertisement
Table of Contents
Troubleshooting
