Transmitting A Message - Icom IC-F3160 SERIES Operating Manual

y Release [PTT].
• "STAT OK" s dsplayed after recevng an acknowledgement
from the base staton.
• "STA FAIL" s dsplayed f there s no acknowledgment from the
base staton.
u After a specfied tme perod has passed, the transcever
wll return to receve.
MDC 1200 SYSTEM OPERATION
D Transmitting a Message
The transcever can send a pre-programmed message.
There are 16 messages that can be sent on a channel.
q Push [MDC Call] to enter the MDC menu selecton mode.
w Select "MSG" usng [CH Up] or [CH Down].
e Push [MDC Call] agan to enter the pre-programmed
message selecton mode.
Pre-programmed message
is displayed.
r Select the desred message usng [CH Up] or [CH Down].
t Push [PTT] to transmt the selected message.
• "MSG TX" s dsplayed.
y Release [PTT].
• "MSG OK" s dsplayed after recevng an acknowledgement
from the base staton.
• "MSG FAIL" s dsplayed f there s no acknowledgment from
the base staton.
u After a specfied tme perod has passed, the transcever
wll return to receve.
MSG
CALL SC CA
MSG
MSG 1
CALL SC CA
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
20