Icom IC-F3160 SERIES Operating Manual page 39

D Transmitting a Message
The transcever has the ablty to send a pre-programmed
message.
There are 10 messages that can be sent on a channel.
q Push [Digital Button] to enter the applcaton selecton
mode.
• "VOICE" appears.
• To change the call type, push and hold [Digital Button] for 1 sec.
durng stand-by operaton. After changng, the transcever en-
ters the applcaton selecton mode automatcally.
w Push [CH Up] or [CH Down] to select "MSG."
e Push [Digital Button] agan to enter the message selec-
ton mode.
• The pre-programmed message s dsplayed.
r Push [CH Up] or [CH Down] to select the desred mes-
sage.
• You can rewrte the contents of the message. See the next page
for detals.
Pre-programmed
message is displayed.
t Push [Digital Button] agan to enter the Indvdual or
Talkgroup ID selecton mode.
• The pre-programmed ID name s dsplayed.
• When ID name s not programmed, ID code s dsplayed.
MSG
MSG 1
DIGI STUP STDN
y Push [CH Up] or [CH Down] to select the desred ID
name (or ID code).
• Dependng on the pre-settng, you can nput the ID drectly.
(10-key verson only) See p. 39 for detals.
Individual or Talkgroup ID
name is displayed.
u Push [PTT] to transmt the message to the selected sta-
ton or talkgroup.
• "MSG TX" s dsplayed.
i Release [PTT].
• "MSG OK" s dsplayed after recevng an acknowledgement
from the base staton.
• "MSG FAIL" s dsplayed f there s no acknowledgment from
the base staton.
o After a specfied tme perod has passed, the transcever
wll return to receve.
Convenient! (10-key verson only)
Dependng on the pre-settng, you can use the quck mes-
sage selecton/transmsson.
➥ Push the desred dgt key ([1] to [9] or [0]) to enter the
message selecton mode.
• The approprate message s dsplayed.
➥ Push and hold the desred dgt key ([1] to [9] or [0]) for
1 sec. to transmt the approprate message 1 to 10.
5
IDAS OPERATION
MSG
STATION 1
DIGI STUP STDN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
36